AFD Collection - Contractor's Model with Moulding

Finish it Your Way with the Contractor's Model with Moulding Outdoor Fireplace by American Fyre Designs. Unfinished is your blank canvas - the glass-fiber reinforced concrete body is the surface where you can apply your tile, stucco, granite, rock or whatever you desire. Features:-High-temperature refractory cement firebox-Unfinished surface allows of customization-One year limited warranty-Glass-fiber reinforced concrete body provides strength and durability.

Contractor's Model with Moulding Spec Sheet PDF

• Instruction Manual PDF
• Contractor Models comes in white GFRC, recessed, and with the key/gas location on the back right.
• Fuel Type: Natural Gas | Propane Type:
• Fireplace Unit | Ready To Finish
• Cast Material: Glass-Fiber Reinforced Concrete | High-Temp Refractory Cement
• Overall Width: 61" Overall Depth: 31" Overall Height: 91"
• Fuel: Intended for exterior use with gas as fuel source. Do NOT use wood logs.

Placement: Free-standing EXTERIOR fireplaces. Use only in well-ventilated areas. It is Buyer's responsibility to place fireplace in a spot that meets any local codes.

CLEANING: Because the fireplace is constructed from GFRC, a concrete product, and the color is CAST all the way through, you can clean the unit like you would other concrete surfaces. The fireplace can be hosed off to remove most of the dust. Before re-sealing or to remove stubborn stains, the entire fireplace should be thoroughly cleaned. Use CLR, a concrete cleaner which can be purchased from Home Depot, and a nylon scrub brush, taking care to rise off the residue.

RE-SEALING: Your fireplace comes from the factory sealed with multiple coats of a non-glossy, penetrating concrete sealer. Application of a similar product semi-annually is recommended, however there is nothing that can protect against pollution and/or acid rain which could stain the finish. In freeze-thaw areas, the fireplace must be covered to keep the elements from collecting inside of the fireplace.

Limited Warranty Manufacturer warrants its products to be free from defects in material and workmanship under normal use and service for a period of twelve (12) months from the date of shipping. Manufacturer will repair or replace without charge, FOB shipping point, of such products or parts of products only, specifically excluding any labor or installation thereof, which the manufacturer determines to be defective upon inspection. Warranty applies to original purchaser only. Customer must notify Manufacturer in writing within (10) days from date of discovery of any claimed defect. Wood-burning voids warranty. Excessive heat and high flames may result in cracks to exterior structure. Do not use fireplace in sub-freezing temperatures. Damage may result from rapid temperature changes.