Scroll To Top


HPC 30"x12" Rectangle Fire Pit Insert - EI Series - HIGH/LOW

(No reviews yet) Write a Review

SKU:
30X12SSEI-H-HI/LO
$3,048.30
Full Description Full Description
HPC 30x12 Rectangle EI Series Insert (Product may vary slightly from image depending on size)

The new "EI Series" are HPC's top of the line, heavy duty, stainless steel fire pits featuring remote control flame as well as auto-relight if flame loss. This is our most advanced control system with numerous convenience and performance improvements. This High/Low model has flame control via our new remote or smart phone app, a redesigned hot surface igniter, and many other improvements.

How it works:

Start Up: This is done by use of a wall switch or remote control (included with HIGH/LOW model) . When the ON command is received, the system completes initial safety checks then starts flow of pilot gas. After 5 seconds the hot surface igniter glows igniting pilot flame. When the system confirms pilot flame present, the main burner gas will flow ignited by the pilot flame.

Operation: While enjoying the ambiance of your fire pit, the system is at work monitoring flame status, internal temperatures / voltages and other safety parameters. If flame loss does occur, the system will turn off all gas flow, and then restart by automatically commencing Start sequence.

Shut Down: To turn OFF the fire pit simply use wall switch, remote control or smart phone.

 

High / Low Flame Control Models:

This model includes a remote control and smart phone app with 2-way communication with the gas fire pit. Remote allows flame height control while receiving information from fire pit to advise user of fire pit status (flashing LED).

 

Features

  • 30" x 12" pan, 24" x 6" H-Burner SS
  • 100K BTU, 120VAC Powered
  • 2 1/2" deep, bowl style pan, with lip, 304 SS, 24" x 6", 304 Stainless Steel H-Burner with raised center hub, 1/2" tubing, holes drilled at 30 degrees for inward flame pattern
  • 16 Gauge SS Valve Control Box, Propane; Hot Wire Ignition
  • Fully Assembled- ready to install. Control components are protected within stainless steel valve box.
  • Start via wall switch, remote or whole house system; Auto re-light if flame is lost.
  • Ignition is complete using a robust and reliable Hot Surface igniter.
  • On/Off models: Use with optional wall switch or Remote Control available.
  • High/Low Flame Control Models: Adjust high setting to low setting- ~45% turndown (Remote Control and Smart Phone App included).
  • 120vac: Standard outdoor grounded power cord- simply plug into GFCI outlet.
  • 24vac Option: Typically used pool side or with other lower voltage requirements.
  • Natural Gas or Liquid Propane: Factory built & tested for either fuel.
  • Internal temperature monitoring with overheat auto shutoff.
  • CSA Certified in US & Canada to ANSI Z21.97-2014 / CSA 2.41-2014 requirements. (This new EI system already meets upcoming 2018 ANSI requirements)!
  • Optional Controls: On/Off Remote, Timers, Power Supplies and an Emergency Shutoff. (See accessories)
  • NOTE: Vinyl Cover and Lava Rock are not included- sold separately.
Length:
Up to 48 Inches