Scroll To Top

Hearth Products Controls - 121" Linear Interlink Fire Pit Insert - EI Series - ON/OFF

(No reviews yet) Write a Review

SKU:
121x8SSEI-L
$4,602.95
Full Description Full Description
HPC Linear EI Series Insert

The new "EI Series" are HPC's top of the line, heavy duty, stainless steel fire pits featuring remote control flame as well as auto-relight if the flame is lost. This is our most advanced control system with numerous convenience and performance improvements for On/Off Models, please also see the High/Low version of this product for advanced flame control via HPC's new remote or smart phone app.

How it works:

Start Up: This is done by use of a wall switch or remote control (sold separately) . When the ON command is received, the system completes initial safety checks then starts flow of pilot gas. After 5 seconds the hot surface igniter glows igniting pilot flame. When the system confirms pilot flame present, the main burner gas will flow ignited by the pilot flame.

Operation: While enjoying the ambiance of your fire pit, the system is at work monitoring flame status, internal temperatures / voltages and other safety parameters. If flame loss does occur, the system will turn off all gas flow, and then restart by automatically commencing Start sequence.

Shut Down: To turn OFF the fire pit simply use wall switch or remote control (sold separately).

 

Features:

  • Start via wall switch, remote or whole house system.
  • Auto re-light if flame is lost.
  • Ignition is complete using a robust and reliable 16 Gauge stainless steel hot wire ignition.
  • On/Off models: Use with optional wall switch or Remote Control available.
  • 120VAC: Standard outdoor grounded power cord- simply plug into GFCI outlet.
  • 24VAC Option: Typically used pool side or with other lower voltage requirements.
  • Natural Gas or Liquid Propane: Factory built & tested for either fuel.
  • Internal temperature monitoring with overheat auto shutoff.
  • CSA Certified in US & Canada to ANSI Z21.97-2014 / CSA 2.41-2014 requirements. This new EI system already meets upcoming 2018 ANSI requirements!
  • 250k BTU, 24VAC or 120VAC
  • Fully Assembled Hot Wire Ignition Fire Pit Insert.
  • Includes 121"x8", 16 Gauge SS Pan, 1.5" sidewalls, 120" SS Linear Burner with HPC's Innovative raised hub technology for water prevention.
  • Built and tested in USA, arrives fully assembled.
Length:
Above 48 Inches